XBB PP-CAN-FD – CAN-bus relay for modern vehicles
XBB PP-CAN-FD is an advanced CAN-bus relay that combines the functions of XBB Dongle and XBB PowerUnit in one compact unit. It connects directly to the vehicle’s CAN-H and CAN-L, leaving the OBD port free and allowing for a discreet and permanent installation.
Reads signals directly from the CAN bus
With vehicle-specific XBB recipes, PP-CAN-FD can read signals such as high beam, ignition and reverse directly from the vehicle’s CAN bus. The unit has two built-in 10 A outputs that can be used separately or combined for a total of 20 A, corresponding to approximately 240 W at 12 V.
Flexible and expandable
PP-CAN-FD supports CAN/CAN-FD, features Bluetooth and can be expanded with other XBB units such as PowerUnit, PowerUnit 6 and Smart Button. The fully potted electronics and IP65 rating provide a robust solution for modern vehicles where minimal wiring and a clean installation are important.
Compatible wiring harness: part no. 121196
Specification XBB PP-CAN-FD
Rated voltage: 12 V
Operating voltage: 9–36 V
Outputs: 2 × 10 A
Outputs combined: Up to 20 A total
Max power at 12 V: approx. 240 W
Analog input: 1 pc, pin 4
Standby consumption: 3–5.4 mA
Consumption with CAN active: approx. 15 mA
Bluetooth: Yes
Accelerometer: 3-axis
Operating temperature: −30 to +85 °C
IP rating: IP65
Weight: 40 g
Material: PA66/plastic
Connection: 7-pin relay socket
Pin configuration
Pin 1 – CAN-L
Pin 2 – +9–36 V
Pin 3 – CAN-H
Pin 4 – Analog input
Pin 5 – Output 1, max 10 A
Pin 6 – GND
Pin 7 – Not used
Pin 8 – Output 2, max 10 A
