OZZ WR2 Red position light and work light

The OZZ WR2 is designed to provide good visibility and increased safety. It provides a powerful and wide light with an actual luminous flux of 2200 lumens and a range of up to 95 meters at 1 lux, making work safer even in tough conditions. The red rear position light contributes to increased visibility and safety. The lightbar has a robust aluminum housing and an impact-resistant polycarbonate lens, making it reliable in all weather conditions. With an IP68/69K rating, it is protected against both dust and water. The product comes with a three-year warranty and is suitable for private use as well as for professional drivers and off-road enthusiasts. Specification Lamp type: LED Diodes (pcs): 22 Lm theoretical (lumen): 3600 Lm measured (lumen): 2200 Volt (V): 10-32 Watt (W): 40 Power at 12V (A): 3 Power at 24V (A): 1.5 Power at 12V (W): 36 Power at 24V (W): 36 Color temp. (K): 5000 1 Lux at (m): 95 WxHxD (mm): 164x45x70 Connection: DT 3-Pin Other classifications: R10 - ECE R65 Class 2, ECE R23, ECE R148 IP: 68/69K Lamp housing: Aluminum Lens: PC Temp.range: -40°C to +60°C Beam pattern: Wide Color: White/red EMC: R10 Cable (m): 1 Before installation 1. Check local laws and regulations for auxiliary lights in the areas where the vehicle will be used before installation. Ensure that the installation meets the requirements. 2. Read all installation instructions. 3. Check that the dimensions and weight of the lights and unit are suitable for your vehicle, see figure 1. 4. Slight condensation inside may occur, this will be ventilated away after 2-4 hours of use. 5. Working voltage: 10-32 V DC. Installation 1. Drill 1 or 3 holes with 11 mm drill, tighten the lock nut. 2. Use braces if needed for stabilization. Connections and functions 1. Cable connections Black: Earth, - Red: Front work light (E-marked), + Blue: Red position light, + 2. Cable set: 40A relay, 30A fuse.