Benefits of Q-light
Stable installation: Q-light is mounted directly to the vehicle’s crash bar.
Made from aluminum, providing low weight and minimizing load on the car.
Gives your auxiliary lights a robust support with a sleek design.
Specifications
Product variant: E63-1
Tube diameter: Ø60 mm
Total width: 1019 mm
Mounts for auxiliary lights: 4 fixed (max Ø240 mm)
Information for this vehicle model
The bracket is mounted to the crash bar using a console.
The front bumper needs to be removed during installation.
Installation and important notes
The installation has been tested with Seeker NS9 LED Ø220 mm and does not interfere with the radar beneath the emblem.
The lights should be positioned as far from the center as possible by moving the screw in the lamp base.
For other lights, accessory 98605 is recommended to maximize distance from the radar.
The lights must be stabilized (bracing rods included).
Recommended maximum weight per lamp: 2 kg.
Estimated installation time: 1 hour and 30 minutes.
Installation instructions are available in the PDF below.