Q-LED VW Transporter T6.1 20- | For LED lightbar

Benefits of Q-LED Stable installation as the Q-LED is mounted directly to the vehicle’s crash bar. The LED light bar can be mounted higher, providing improved light distribution. Made from aluminum—a lightweight material that won’t weigh down your vehicle. Specifications Product variant: L10-1 Tube diameter: Ø60 mm Total width: 760 mm Total depth from front: 75 mm (plus part of the LED bar) Designed for 20" LED bars with side mounts and a width between 475–560 mm Angles included Installation and information for this vehicle model The installation is based on the crash bar, providing a stable mounting point for the LED bar. The front bumper is removed during installation. The installation does not interfere with the radar located under the emblem. Inner parking sensors may need to be deactivated depending on the chosen height of the Q-LED and LED bar. Sensor elimination (deactivation kit) is included. Round lights can be mounted on top of the Q-LED using Q-LED Blocks (accessory). It is possible to install the Q-LED without an LED bar. In this case, the Q-LED can be mounted lower on the vehicle. A maximum of two round lights with a diameter of Ø175 mm can be mounted wide without interfering with the radar. Other information Installation time: 2 hours Installation instructions are available in the PDF below.