T-RACK Mercedes Sprinter 18- Rear H2 with OE camera

Benefits of the T-rack Rear Bar Meets the requirements for roadside work when a warning light is installed (a forward-facing warning light is also required to fully meet regulations). Mounts to the vehicle’s existing roof attachment points. Work lighting makes it easy to operate in the dark. Option to install a reversing camera. Made from aluminum, a lightweight material that won’t weigh down the vehicle. Can be delivered with lighting and accessories pre-installed and ready to use. Specifications Product variant: B45-3 for H2 (high roof: 2620 mm, WB: L2 = 3665 mm & L3 = 4325 mm) Tube diameter: Ø60 mm Width (W): 1280 mm Length (L): 675 mm Weight: 4.1 kg WLTP Front area: 0.077 m² Pre-drilled holes: 6x Ø20 mm (inside) – work lights 1x Ø20 mm (inside) – outgoing cable (center of bar) 4x Ø10 mm (outside) – warning lights Information for this vehicle model Fits Sprinter with H2 height = 2620 mm. The product is mounted using existing holes with through bolts. WB L3: If directional warning lights are mounted on the sides of the roof bar, an adapter is used during installation. Installation time Approximately 1 hour and 30 minutes. Installation instructions are available in the PDF below.