Sarox9+ LED Driving Light 120W | White

Ledson Sarox9+ in ivory white color features four strong LEDs as position lights and allows you to choose between xenon white or yellow-orange, just like the rest of our driving lights in the "+ series". The contemporary design of Sarox is a combination of sleek and progressive, while the inside of the driving light impresses with quality components that make all the difference when you're out driving in the dark. How about: 1 lux brightness at 469 meters and 10200 actual lumens, substantial protection against harsh climates on our Nordic roads with IP69K classification, E-markings (ECE R112/R10/R7), membranes for automatic pressure equalization, electronic heat management for optimal LED performance and lifespan, aluminum heat sink, stainless steel bracket. Sarox 9+ has a combined light pattern (combo). A combined light pattern is a mix between high beam (distance) and floodlight (width). The driving light has diodes that reflect light both straight ahead and to the sides. This light pattern is ideal if you want a lot of light close to the vehicle for the smaller roads but still want the range to illuminate the road far ahead. Features: With position lights, yellow-orange or xenon white (connect the color you desire) Combo beam light pattern (a mix between spot and flood) E-marked ECE R112 (Ref. 45), R10 / R7 (white position light) Range: 938 m (0.25 lux), 469 m (1 lux) EMC secured (does not interfere with radio) 12000 lumens (theoretical), 10200 lumens (actual) Cool white light (5000K) TIR (Total Inner Reflection) utilizes all light and minimizes stray light ETM (Electronic Thermal Management) - adjusts the strength of the diodes depending on how hot they are for an optimal lifespan Side-reflecting optical system Pressure equalization membrane Aluminum heat sink Adjustable stainless steel bracket Lexan polycarbonate Polycarbonate lens Sold individually 36-month warranty Technical data: 120W (4 x 20W Cree LED + 4 x 10W Cree LED) IP69K (water/dustproof) DT connector 4 pins included Voltage 9-36 V Load high beam: 8.1A @ 12V and 4.4A @ 24V Load position light: 0.9A Dimensions & weight: Width: 218 mm Height: 218 mm (233 mm including bracket) Depth: 84 mm Cable length: 42 cm Weight: 1.8 kg Included: One Ledson Sarox9+ LED driving light 9" Bracket, bolts, and screws to attach the driving light with either one or two mounting points DT connector (4-pin) complement with Ledson Connect Installation instructions DT adapter Cable installation instructions (detailed installation instructions included): Red: Driving light (+) Black: Driving light / Position light (- ground) White: Position light (+) white light Yellow: Position light (+) yellow-orange light NOTE: The DT connector should not be cut as it increases the risk of moisture damage, and the warranty will be void.