Pollux9+ Gen3 Powerboost LED Driving Light 120W | Strobe

LEDSON Pollux9+ Generation 3: More powerful and smarter than ever With the Pollux9+ Generation 3, you enhance your driving experience with the latest technology from Ledson in a driving light filled with features. With an impressive 120W output and the groundbreaking pulsating Powerboost feature, this third generation of Pollux9+ offers increased flexibility and improved brightness when needed most. The Pollux9+ Generation 3 provides outstanding brightness and range to ensure superior visibility and safety under all driving conditions. With its robust design, the Pollux9+ Generation 3 is built to withstand tough conditions and is ready to deliver superior performance for a long time to come. Pulsating Powerboost - Smooth as it gets The Pollux9+ Gen3 comes equipped with Powerboost – an additional power mode for those moments when you need maximum illumination. You can conveniently switch between standard and powerboost mode from the driver's seat in your vehicle. With the new generation Powerboost from Ledson, you can easily switch modes with the light switch through a few simple steps. Switch to Powerboost mode with "10+10+5" This is done most easily with the 'light switch' when the light switch is in the off or parking light mode Turn on the driving light for about 10 seconds (between 7-13 seconds) Flash the driving light rapidly 10 times (within 10 seconds) The eleventh time you should have the driving light on, and after about 5 seconds, the Powerboost function will automatically switch on or off. TIR Reflectors TIR stands for Total Inner Reflection and means that all light is efficiently reflected and directed before being sent out from the reflector. Spill light (the light that is not directed but disappears "unfocused" from the lighting without doing any real good) is minimized. A traditional reflector directs and focuses most of the light but far from all, Pollux 9+ has these TIR reflectors for maximum light. Choose your light pattern: Driving or Spot Beam Choose between Driving Beam for a balanced light pattern that complements your vehicle's headlights, or Spot Beam for a powerful and focused beam of light that effectively illuminates the road ahead of you. Flashlights Choose between five different flash patterns and synchronize them between your Pollux9+ Gen3 driving lights. Either these driving lights can be connected to synchronize flashlights across all connected devices or they can be connected in two groups to get alternating flash patterns. Features: E-marked (ref. 37.5 for Driving Beam, ref. 50 for Spot Beam), ECE R112 / R10 / R7 (white position light) Equipped with pulsating powerboost EMC-secured (does not interfere with the radio) Five different approved flash patterns, one ECE R65-approved With position light (4 x LED) yellow-orange or xenon white (connect the color you prefer) "Driving beam" light pattern (33491238) or "Spot Beam" light pattern (33491239) - choose variant Range Driving Beam: 407 m (1 lux), Powerboost: 659 m (1 lux) Range Spot Beam: 493 m (1 lux), Powerboost: 805 m (1 lux) 4200 lumens (theoretical), 3500 lumens (actual) Powerboost 13000 lumens (theoretical), 10500 lumens (actual) Cool white light (5000 K) TIR optical system (Total Inner Reflection) Pressure equalization membrane 36 months warranty Technical data: 120W (12 x 10W LED) + 4 x 3W LED for flashlights Nominal power 92.4 W IP68 & IP69K (water/dustproof) DT connector (6-pin) included Electronic heat management Voltage 9-36 V Load 3.2 A @ 12 V and 1.6 A @ 24 V Load Powerboost 9.8 A @ 12 V and 4.6 A @ 24 V Dimensions & weight: Width: 218 mm Height: 234.5 mm (incl bracket) Depth: 68.5 mm Weight: 1.9 kg Cable length: 650 mm Included: Ledson Pollux9+ Generation 3 LED driving light Bolts and screws to attach the driving light with either one or two mounting points DT connector (6-pin) complement with Ledson Connect Installation instructions Cable installation instructions (detailed installation instructions included with the product): Red: Driving light (+) Black: Driving light / Position light (- ground) White: Position light (+) white light Yellow: Position light (+) yellow-orange light Green: Flashlight (+) Blue: Synchronization & pattern (+) Brown: Alternating (+) Flashlight patterns: Single flash (ECE R65-approved) Double flash Triple flash Quadruple flash Continuous hyperflash Note: The DT connector must not be cut as it increases the risk of moisture damage and voids the warranty.