Orion10+ Gen2 Strobe Auxiliary Light 100W

Orion10+ Gen2 Strobe with warning strobe light Orion10+ Gen2 Strobe is a further development of the Orion10+ Gen2. In addition to everything a standard Orion10+ Gen2 offers, this driving light is also equipped with a built-in strobe light. The strobe consists of four powerful LEDs that can be used in five different flash patterns, one of which is R65-approved. "Strongest oval lamp" in Trailer Magazine! The strongest of the oval headlights tested. Unique with a stylish design featuring two vertical position-light surfaces, providing a clean and attractive installation when mounting multiple lamps low together. A pronounced long-range beam character gives a strong and far-reaching light pattern, especially when several units are installed together. Flash patterns Single flash (ECE R65) Double flash Triple flash Quad flash Continuous hyper flash Synchronisable with alternating flash modes Orion10+ Gen2 Strobe units can be synchronized with each other, meaning all driving lights use the same flash pattern and flash in sync. You also have the option to use alternating flash mode, which allows your lights to be divided into two groups flashing opposite each other (e.g., left/right or upper/lower). All flash patterns can be used in alternating mode, giving you 10 different flash pattern options. Synchronisation and alternating flashing can be used with an unlimited number of driving lights — there are no limitations. A long list of technical, but important, features Besides its beautiful design, the lamp is equipped with a stylish position light that can be set to xenon-white or amber: you choose the colour you prefer, and if you want to change it later, you can switch it at any time. Orion10+ Gen2 features multiple E-markings ECE R112 / R65 / R10 / R7, 8500 actual lumens, 6000K colour temperature for a modern look, ETM / EMC (explained further down), side-reflective optical system, and more… combined with excellent performance, Orion10+ brings that highly desired “must-have feeling”! Thanks to its size and design, Orion10+ Gen2 looks great on passenger cars, larger vehicles, and trucks. Driving Beam light pattern All Driving Beam reflectors are computer-designed and engineered to give a light pattern similar to a combo beam, but more even and within legal limits. It mimics and enhances the vehicle’s existing headlights and beam pattern. Features: Strobe light (4 orange LEDs) with 5 different flash patterns Position light, amber or xenon-white (connect the colour you prefer) Driving Beam light pattern that mimics and enhances the vehicle’s original beam E-marked E9 (Ref. 37.5), ECE R112 / R65 / R10 / R7 (white position light) Beam distance: 850 m (0.25 lux), 444 m (1 lux) EMC protected (does not interfere with radio) 10,000 lumens (theoretical), 8,500 lumens (actual) Cool-white light (6000 K) ETM (Electronic Thermal Management) – adjusts LED output depending on temperature for optimal lifespan Side-reflective optical system Pressure equalisation membrane Aluminium heat sink Adjustable stainless-steel bracket Lexan polycarbonate front lens 36-month warranty Technical data: 100W (4 x 25W LED) IP69K (water/dustproof) DT connector (DT 6-to-2 pin adapter and 4 open wires included) Voltage 9–36 V Power draw 6.8 A @ 12 V and 3.4 A @ 24 V Dimensions & weight: Width: 247 mm Height: 141 mm (176 mm incl. bracket) Depth: 92 mm Weight: 1.82 kg Cable length: 650 mm Included: Orion10+ Gen2 Strobe LED driving light 10" Bracket, bolts and screws for mounting the lamp using one or two mounting points DT connector (6-pin) DT adapter from 6-pin to 2-pin, with 4 open wires included DT adapter from 6-pin to 6 open wires Installation manual Wiring instructions (full installation instructions included): Red: Driving light (+) Black: Driving light / Position light (– ground) White: Position light (+) white Yellow: Position light (+) amber Green: Strobe light (+) Blue: Synchronisation & pattern (+) Brown: Alternating mode (+) NOTE: The DT connector must not be cut, as this increases the risk of moisture damage and voids the warranty. Technical information: E-marking E9, Yes Height (mm) 141 mm (176 mm incl. bracket) Delivered piece Width (mm) 247.000000 Voltage 9–36 V Depth 92 mm Warranty 36 Months Type of beam Driving beam Number of LEDs 4 pcs Intended use Outdoor use Brand Ledson Cable length 650 mm Width (mm) 247 mm Power consumption 12V/24V 6.8 A @ 12 V and 3.4 A @ 24 V Warm-up time, cold to full Instant Light source LED Position Strobe light, High beam Luminous output 10,000 lumens (theoretical), 8,500 lumens (actual) Function (position) Strobe light, Position light Manufacturer Ledson