Orion10+ Gen2 Auxiliary Light 100W

When futuristic design meets raw power... Ledson Orion10+ Gen 2 "Strongest oval lamp" in Trailer Magazine! The strongest of the oval headlights tested. Unique with a stylish design featuring two vertical decorative light surfaces that provide a clean installation when multiple lamps are mounted low together. A pronounced long-range beam character creates a powerful light image that reaches far when several units are mounted together. With its sleek futuristic design, it’s hard not to let your eyes linger on the Ledson Orion10+ Gen2… now upgraded to Gen2 with even more light output! We know how important it is to have a driving light that not only performs beyond expectations, but also looks stunning. Want to own something that turns you into an attention-grabber? That elevates your vehicle’s status? But that also loyally pushes back the darkness at night and makes your driving significantly safer? Brightness that matters Of course, Ledson ensured that a driving light with tomorrow’s design also delivers generous amounts of light. 8500 actual lumens, 1 lux at 444 meters, and 0.25 lux at 850 meters (per lamp) give you the visibility on dark roads that you’ve been missing! A long list of technical, yet important, features Besides its beautiful design, the lamp is also equipped with a stylish position light that can be set between xenon-white and amber: you choose the colour you want, and if you get tired of one, just switch it. Orion10+ Gen2 carries several E-approvals ECE R112 / R10 / R7, 8500 actual lumens, 6000K colour temperature for a modern look, ETM / EMC (explained under features below), side-reflective optical system, and more… Together with its impressive performance, Orion10+ Gen2 has that desirable must-have feeling! Thanks to its size and design, the Orion10+ Gen2 looks great mounted on cars, larger vehicles, and trucks. Driving Beam light pattern All Driving Beam reflectors are computer-designed and engineered to deliver a light image similar to a combo pattern but more even and within legal limits. It mimics and enhances the vehicle’s existing headlight pattern. Features: With position light, amber or xenon-white (connect the colour you prefer) Driving Beam pattern that mimics and enhances the vehicle’s original light image E-marked E9 (Ref. 37.5), ECE R112 / R10 / R7 (white position light) Range: 850 m (0.25 lux), 444 m (1 lux) EMC-protected (does not interfere with radio) 10,000 lumens (theoretical), 8500 lumens (actual) Cool-white light (6000 K) ETM (Electronic Thermal Management) – adjusts LED output based on temperature for optimal lifespan Side-reflective optical system Pressure equalisation membrane Aluminium heat sink Adjustable stainless steel bracket Lexan polycarbonate front lens 36-month warranty Technical data: 100W (4 x 25W LED) IP69K (water/dustproof) Moulded DT connector / DT adapter 2–4 pin included Voltage 9–36 V Power draw 6.8 A @ 12 V and 3.4 A @ 24 V Dimensions & weight: Width: 247 mm Height: 141 mm (176 mm incl. bracket) Depth: 92 mm Weight: 1.82 kg Cable length: 650 mm Included: Ledson Orion10+ Gen2 LED driving light 10" Bracket, bolts and screws for mounting the lamp with either one or two mounting points DT connector (4-pin) Installation instructions Wiring instructions for cables (full manual included): Red: Driving light (+) Black: Driving light / Position light (– ground) White: Position light (+) white Yellow: Position light (+) amber NOTE: The DT connector must not be cut, as this increases the risk of moisture damage and voids the warranty. Technical information: E-marking E9, Yes Height (mm) 141 mm (176 mm incl. bracket) Delivered piece Width (mm) 247.000000 Voltage 9-36 V Depth 92 mm Warranty 36 Months Type of beam Driving beam Number of LEDs 4 pcs Intended use Outdoor use Cable length 650 mm Width (mm) 247 mm Power consumption 12V/24V 6.8 A @ 12 V and 3.4 A @ 24 V Warm-up time, cold to full Instant Light source LED Position High beam Luminous output 10,000 lumens (theoretical), 8,500 lumens (actual) Manufacturer Ledson