Epix9+ Strobe Auxiliary Light | Wide | White

Epix9+ Strobe with Wide Driving Beam — now with even more beam width! Self-developed Swedish design in white finish Epix9+ Strobe in an elegant white (ivory white) finish is equipped with five different flash patterns, one of which is R65-approved. Its Wide Driving Beam provides a 40° wide light pattern (compared to 20° for Driving Beam), covering a larger area and offering optimal visibility even in the most demanding environments. The wide beam makes it easier to spot animals and unexpected hazards in time, increasing safety for you and your fellow road users. Despite its wide beam, the Epix9+ delivers an impressive range of 677 meters in Powerboost mode (359 meters in E-approved mode), providing a balanced combination of width and distance. Self-developed Swedish design Epix9+ from Ledson is an innovative series of auxiliary driving lights that elevates your vehicle to the next level. It is equipped with five different flash patterns, one of which is R65-approved. With a Swedish design language (developed in-house by Ledson) and outstanding performance, these lights give your vehicle a truly unique and exclusive look that is guaranteed to draw attention! Experience exceptional brightness and design in perfect harmony. The white finish is a perfect match to Scania’s factory white shade, among others. Flash patterns Single flash (ECE R65-approved), double flash, triple flash, quad flash, continuous hyper-flash. Synchronizable and with alternating flash mode Epix9+ Strobe units can be synchronized with one another, meaning all units use the same flash pattern and blink in sync. An alternating flash mode is also available, dividing your auxiliary lights into two groups that blink opposite each other (e.g., right/left or upper/lower). All flash patterns can be used in alternating mode, giving you 10 different flashing combinations. You can sync and run alternating patterns with an unlimited number of lights — there is no limit. Dynamic position light Epix9+ Strobe activates the position lights dynamically with an eye-catching sweeping motion that smoothly moves across the lamp before illuminating fully. This effect gives you and your vehicle a distinctive and unique character. Pulse-controlled Powerboost — It doesn’t get easier than this Epix9+ Strobe comes equipped with Powerboost — an extra brightness mode for those moments when you need (or simply want) maximum output. A simple action with the high-beam stalk activates this impressive power, allowing you to easily adjust the brightness based on your needs. With the new generation of Powerboost, switching modes using the headlight flasher (tapping the stalk) is effortless, following just a few simple steps shown here. NOTE: your auxiliary light is delivered in E-approved mode; follow the instructions to activate Powerboost mode. Features and technical data: Wide Driving Beam with 40° wide light spread (compared to 20° for Driving Beam) Flashlight with five flash patterns (one R65-approved) Ivory white design matching, among others, Scania’s white paint shade Selectable position light with dynamic activation (amber or xenon white — connect the color you prefer) Range in E-approved mode: 359 m (1 lux) Range in Powerboost mode: 677 m (1 lux) E-marked ECE R112 (Ref. 30), R7 (white position light) EMC-secured ECE R10 (does not interfere with radio) E-approved mode: 2,640 lumens (theoretical), 2,112 lumens (actual) Powerboost mode: 15,000 lumens (theoretical), 11,000 lumens (actual) Neutral white light (5000K) ETM (Electronic Thermal Management) – adjusts LED output depending on temperature for optimal lifespan Side-reflective optical system Pressure equalization membrane Aluminum heat sink Adjustable stainless-steel bracket Polycarbonate lens 36-month warranty Technical data: 180W (4 × 20W Cree LED + 4 × 10W Cree LED), strobe 12W (4 × 3W LED) Nominal output: 154W (Powerboost) IP69K (water/dustproof) Cable with 6-pin DT connector Voltage 9–36 V Power consumption in E-approved mode: 2.2A @ 12V and 1.1A @ 24V (high beam only, without position light) Power consumption in Powerboost high-beam mode: 12.6A @ 12V and 5.6A @ 24V (high beam only, without position light) Dimensions & weight: Width: 225 mm Height: 223 mm (incl. bracket) Depth: 86 mm Weight: 2.23 kg Included: One Ledson Epix9+ Strobe LED auxiliary light 9", white design Bracket, bolts and screws for mounting the light with one or two mounting points DT connector (6-pin), complete with Ledson Connect Installation manual Wiring guide (detailed instructions included): Red: Auxiliary light (+) Black: Auxiliary light / Position light (– ground) White: Position light (+) white light Yellow: Position light (+) amber light Green: Strobe (+) Blue: Sync & pattern (+) Brown: Alternating mode (+) NOTE: The DT connector must not be cut, as this increases the risk of moisture damage and voids the warranty. E-marking: ECE R10, ECE R112, ECE R65, R7 Height (mm): 223 (incl. bracket) Width (mm): 225 Warranty: 36 Months Flash patterns: 5 Light source: LED Powerboost: Yes Lumens (theoretical): Powerboost: 15000 Lumens (actual): Powerboost: 11000 Manufacturer: Ledson Light color (secondary functions): Amber, White Inch size: 9 inch Connection (number of pins): 6 pins Shape: Octagon Color temperature: 5000K IP rating: IP69K Housing color: White 1 lux at: 359 m (Powerboost: 677 m) Connector type: DT Power consumption 12V: 2.2A (Powerboost: 12.6A) Power consumption 24V: 1.1A (Powerboost: 5.6A) Color: White Width (mm): 225 Depth (mm): 86 Beam pattern: Driving beam Function: Strobe, Auxiliary light, Position light