Epix9+ Strobe Auxiliary Light | Wide

Epix9+ Strobe with Wide Driving Beam provides even more width in the light pattern! Epix9+ Strobe with Wide Driving Beam has a 40° wide beam pattern (compared to 20° for Driving Beam) that covers a larger area and offers optimal visibility even in the most demanding environments. The wide beam makes it easier to spot animals and other unexpected hazards in time, increasing safety for you and fellow road users. Despite its wide beam, the Epix9+ offers an impressive range of 663 meters in Powerboost mode (359 meters in E-approved mode), providing a well-balanced combination of width and distance. Self-developed Swedish design Epix9+ Strobe from Ledson is an innovative series of auxiliary lights that elevates your vehicle to the next level, and it is also equipped with 5 different flash patterns, one of which is R65-approved. With a Swedish design language (developed in-house by Ledson) and outstanding performance, these auxiliary lights give your vehicle a truly unique and exclusive appearance that is guaranteed to draw attention! Experience exceptional brightness and design in perfect balance. Flash patterns Single flash (ECE R65-approved), double flash, triple flash, quadruple flash, continuous hyper-flash. Synchronizable and with alternating flash mode Epix9+ Strobe units can be synchronized with each other, meaning all auxiliary lights use the same flash pattern and blink in sync. Alternating flash mode is also available, meaning your lights can be divided into two groups that flash opposite each other (e.g., right / left or upper / lower). All flash patterns can be used alternately, giving you 10 different flash modes with this function. It is possible to synchronize and use alternating patterns with an unlimited number of auxiliary lights—there are no restrictions. Dynamic position light Epix9+ Strobe activates the position light dynamically with an impressive sweeping motion that smoothly moves the light from one side to the other before fully illuminating. This effect gives you and your vehicle a distinctive and unique character. Pulse-controlled Powerboost - It doesn’t get easier than this Epix9+ Strobe is equipped with Powerboost – an extra power mode for those moments when you need (or simply want) maximum brightness. A simple action with the high-beam stalk activates this impressive power, allowing you to easily adjust the amount of light based on your needs. With the new generation of Powerboost from Ledson, mode changes are extremely easy using the headlight flasher (tapping the high-beam stalk) in just a few simple steps shown here. NOTE: your auxiliary light is delivered in E-approved mode; follow the instructions to activate Powerboost mode. Features and technical data: Wide Driving Beam with 40° wide light spread (compared to 20° for Driving Beam) Flashlight with five different flash patterns (one R65-approved) Selectable position light with dynamic activation (amber or xenon white, connect the color you prefer) Range in E-approved mode: 359 m (1 lux) Range in Powerboost mode: 677 m (1 lux) E-marked ECE R112 (Ref. 30), R7 (white position light) - Read more about E-markings here EMC-protected ECE R10 (does not interfere with radio) E-approved mode: 2,640 lumens (theoretical), 2,112 lumens (actual) Powerboost mode: 15,000 lumens (theoretical), 11,000 lumens (actual) Neutral white light (5000K) ETM (Electronic Thermal Management) - adjusts LED power depending on temperature for optimum lifespan Side-reflective optical system Pressure equalizing membrane Aluminum cooling fins Adjustable stainless-steel bracket Polycarbonate lens 36-month warranty Technical data: 180W (4 x 20W Cree LED + 4 x 10W Cree LED), strobe 12W (4 x 3W LED) Nominal power: 154W (Powerboost) IP69K (water/dustproof) Cable with 6-pin DT connector Voltage: 9–36 V Power consumption E-approved mode: 1.5A @ 12V and 0.7A @ 24V (high beam only, without position light) Power consumption Powerboost mode: 12.6A @ 12V and 5.6A @ 24V (high beam only, without position light) Dimensions & weight: Width: 225 mm Height: 223 mm (incl. bracket) Depth: 86 mm Weight: 2.23 kg Included: One Ledson Epix9+ Strobe LED auxiliary light 9" Bracket, bolts and screws for mounting the light with either one or two mounting points DT connector (6-pin), complete with Ledson Connect Installation instructions Wiring instructions (detailed instructions included): Red: High beam (+) Black: High beam / Position light (- ground) White: Position light (+) white light Yellow: Position light (+) amber light Green: Strobe (+) Blue: Synchronization & pattern (+) Brown: Alternating mode (+) NOTE: The DT connector must not be cut as this increases the risk of moisture damage, and the warranty will be void. Technical information: E-marking: ECE R10, ECE R112, ECE R65, R7 Height (mm): 223 (incl. bracket) Width (mm): 225.000000 Warranty: 36 Months Flash patterns: 5 Light source: LED Powerboost: Yes Lumens (theoretical): Powerboost: 15000 Lumens (actual): Powerboost: 11000 Manufacturer: Ledson Light color (secondary functions): Amber, White Inch size: 9 inch Connection (number of pins): 6 pins Shape (round, oval, straight etc.): Octagon Color temperature: 5000K IP rating: IP69K Color (housing): Black 1 lux at x meters: 359 (Powerboost: 677) Connection (connector type): DT Power consumption 12V: 1.5A (Powerboost: 12.6A) Power consumption 24V: 0.7A (Powerboost: 5.6A) Color: White Width (mm): 225 Depth: 86 Beam type: Driving beam Function (position): Strobe, High beam, Position light