Epix9+ Auxiliary Light | Wide | White

Epix9+ with Wide Driving Beam — now with even more beam width! Self-developed Swedish design in white (ivory white) Epix9+ in elegant white (ivory white) and equipped with a Wide Driving Beam delivers a 40° wide light pattern (compared to 20° for a standard Driving Beam) that covers a larger area and provides optimal visibility even in the most demanding environments. The wide beam makes it easier to detect animals and other unexpected hazards in time, increasing safety for you and your fellow road users. Despite its wide beam pattern, the Epix9+ offers an impressive range of 677 meters in Powerboost mode (359 meters in E-approved mode), providing a well-balanced combination of width and distance. Self-developed Swedish design Epix9+ from Ledson is an innovative series of auxiliary driving lights that elevates your vehicle to the next level. With a Swedish design language (developed in-house by Ledson) and exceptional performance, these lights give your vehicle a truly unique and exclusive appearance that is guaranteed to attract attention! Experience brightness and design in perfect balance. Dynamic position light Epix9+ activates the position light dynamically with an impressive sweeping motion that smoothly moves the light from one side of the lamp to the other before fully illuminating. This effect gives your vehicle a distinctive and unique character. Pulse-controlled Powerboost – It doesn’t get easier than this Epix9+ is equipped with Powerboost – an extra high-output mode for those moments when you need (or simply want) maximum brightness. A simple action using the high-beam stalk activates this powerful mode, allowing you to easily adjust the light output as needed. With the new generation of Powerboost from Ledson, you can switch modes effortlessly using the headlight flasher (tapping the high-beam stalk) through a few simple steps shown here. NOTE: your auxiliary light is delivered in E-approved mode; follow the instructions to activate Powerboost mode. Mounting the Epix9+ on your vehicle Connection: Ledson Connect 4-pin wiring kits – connect your auxiliary lights in just a few clicks! With Connect, installation becomes easy – the wiring kit with pre-assembled connectors fits all vehicles with halogen, xenon, or LED high beams. Plug & Play: Avoid complicated wiring – connect directly using the included fuse tap or adapter cable (accessory), with no modification to the vehicle’s original wiring. Smart functionality: Control both the auxiliary light and the position light directly via the wiring harness. Flexible: Add a switch harness to disable the auxiliary lights in fog or heavy snow. Compatible with XBB: The perfect solution for vehicles with Xenon or LED – no impact on the vehicle’s original wiring when using the XBB Dongle & Power Unit. Mounting: Can be installed cleanly and easily using a license plate bracket or tube mount. See our accessories for mounting options. Features and technical data: Wide Driving Beam with 40° beam spread (compared to 20° for Driving Beam) Ivory white design matching, among others, Scania’s white paint shade Selectable position light with dynamic activation (amber or xenon white – connect the color you prefer) Range in E-approved mode: 359 m (1 lux) Range in Powerboost mode: 677 m (1 lux) E-marked ECE R112 (Ref. 30), R7 (white position light) EMC-secured ECE R10 (does not interfere with radio) E-approved mode: 2,640 lumens (theoretical), 2,112 lumens (actual) Powerboost mode: 15,000 lumens (theoretical), 11,000 lumens (actual) Neutral white light (5000K) ETM (Electronic Thermal Management) – adjusts LED output depending on temperature for optimal lifespan Side-reflective optical system Pressure equalization membrane Aluminum heat sink Adjustable stainless-steel bracket Polycarbonate lens 36-month warranty Technical data: 180W (4 × 20W Cree LED + 4 × 10W Cree LED) Nominal output: 154W (Powerboost) IP69K (water/dustproof) Cable with 4-pin DT connector Voltage 9–36 V Power consumption in E-approved mode: 2.2A @ 12V and 1.1A @ 24V (high beam only, without position light) Power consumption in Powerboost high-beam mode: 12.6A @ 12V and 5.6A @ 24V (high beam only, without position light) Dimensions & weight: Width: 225 mm Height: 223 mm (incl. bracket) Depth: 86 mm Weight: 2.23 kg Included: Ledson Epix9+ Wide Driving Beam LED auxiliary light 9" white design Bracket, bolts, and screws for mounting the light with one or two mounting points DT connector (4-pin), complete with Ledson Connect Installation manual Wiring instructions (detailed installation instructions included): Red: Auxiliary light (+) Black: Auxiliary light / Position light (– ground) White: Position light (+) white light Yellow: Position light (+) amber light NOTE: The DT connector must not be cut, as this significantly increases the risk of moisture damage and voids the warranty. Technical information: E-marking: ECE R10, ECE R112, R7 Height (mm): 223 (incl. bracket) Width (mm): 225.000000 Warranty: 36 Months Light source: LED Powerboost: Yes Lumens (theoretical): Powerboost: 15000 Lumens (actual): Powerboost: 11000 Manufacturer: Ledson Light color (secondary functions): Amber, White Size: 9 inch Connection (pins): 4 pins Color temperature: 5000K IP rating: IP69K Housing color: White 1 lux at: 359 m (Powerboost: 677 m) Voltage: 9–36 V Connector type: DT Power use 12V: 2.2A (Powerboost: 12.6A) Power use 24V: 1.1A (Powerboost: 5.6A) Color: White Width (mm): 225 Depth (mm): 86 Beam pattern: Driving beam Function: Auxiliary light, Position light