Epix9+ Auxiliary Light | Wide

Epix9+ Wide – Where Design Meets Maximum Performance Epix9+ Wide is a revolutionary product that combines sleek design with cutting-edge technology. With unmatched performance, durability, and energy efficiency, it is built to impress and deliver. Manufactured from premium materials to withstand any challenge, Epix9+ Wide is the perfect choice for those who demand the best. Wider beam pattern for your safety Epix9+ Wide Range offers a 40° wide beam pattern that covers a larger area and provides optimal visibility even in the most demanding environments. The wide beam makes it easier to detect obstacles in time, increasing safety for both you and other road users. Tip! Epix9+ Wide can advantageously be combined with Epix9+ to create an optimal light pattern that reaches far ahead while also covering a wide area. The combination of these two variants provides the perfect balance between distance and width, making them an ideal choice for everything from highway driving to off-road adventures. Self-developed Swedish design Epix9+ from Ledson is an innovative series of auxiliary lights that takes your vehicle to the next level. With a Swedish design language (developed in-house by Ledson) and exceptional performance, these lights give your vehicle a truly unique and exclusive appearance that is guaranteed to attract attention! Experience outstanding brightness and design in perfect harmony. Dynamic position light Epix9+ lights the position light dynamically with a striking sweeping motion that moves elegantly from one side of the light to the other before fully illuminating. This effect gives you and your vehicle a distinctive and unique character. Pulse-controlled Powerboost – It doesn’t get easier than this Epix9 is equipped with Ledson Powerboost – an extra power mode for those moments when you need (or simply want) maximum brightness. A simple action with the high-beam stalk activates this impressive intensity, allowing you to easily adapt the amount of light to your needs. With the new generation of Powerboost from Ledson, switching modes is very easy using the headlight flasher (tapping the high-beam stalk) through a few simple steps shown here. NOTE: your auxiliary light is delivered in E-approved mode, follow the instructions to activate Powerboost mode. Mounting the Epix9+ on your vehicle Connection: Ledson Connect 4-pin wiring kits – connect your auxiliary lights in just a few clicks! With Connect, installation becomes easy – the wiring kit with pre-assembled connectors fits all cars with halogen, xenon, or LED high beams. Plug & Play: Avoid complicated wiring – connect directly with the included fuse tap or adapter cable (accessory), with no modification to the car’s original wiring. Smart functionality: Control both auxiliary light and position light directly through the wiring. Flexible: Add a switch harness to turn off the auxiliary lights in fog or snow. Compatible with XBB: Perfect solution for vehicles with Xenon or LED – no impact on original wiring when using XBB Dongle and Power Unit. Mounting: Can be mounted cleanly and easily using a license plate bracket or tube mount. See our accessories for mounting options. Features and technical data: Selectable position light with dynamic activation (amber or xenon white, connect the color you prefer) Range in E-approved mode: 359 m (1 lux) Range in Powerboost mode: 677 m (1 lux) Driving beam pattern with 40° long-distance spread E-marked ECE R112 (Ref. 30), R7 (white position light) EMC-secured ECE R10 (does not interfere with radio) E-approved mode: 2,640 lumens (theoretical), 2,112 lumens (actual) Powerboost mode: 15,000 lumens (theoretical), 11,000 lumens (actual) Neutral white light (5000K) ETM (Electronic Thermal Management) – adjusts diode strength based on temperature for optimal lifespan Side-reflective optical system Pressure equalization membrane Aluminum heat sink Adjustable stainless-steel bracket Polycarbonate lens 36-month warranty Technical data: 180W (4 × 20W Cree LED + 4 × 10W Cree LED) Nominal power: 154W (Powerboost) IP69K (water/dustproof) Cable with 4-pin DT connector Voltage 9–36 V Power consumption in E-approved mode: 1.5A @ 12V and 0.7A @ 24V (high beam only, without position light) Power consumption in Powerboost high-beam mode: 12.6A @ 12V and 5.6A @ 24V (high beam only, without position light) Dimensions & weight: Width: 225 mm Height: 223 mm (incl. bracket) Depth: 86 mm Weight: 2.23 kg Included: One Ledson Epix9+ LED auxiliary light 9" Bracket, bolts and screws for mounting the light with either one or two mounting points DT connector (4-pin), complete with Ledson Connect Installation instructions Wiring instructions (detailed installation instructions included): Red: Auxiliary light (+) Black: Auxiliary light / Position light (– ground) White: Position light (+) white light Yellow: Position light (+) amber light NOTE: The DT connector must not be cut, as this increases the risk of moisture damage and voids the warranty. Technical information: E-marking: ECE R10, ECE R112, R7 Height (mm): 223 (incl. bracket) Width (mm): 225.000000 Warranty: 36 Months Light source: LED Powerboost: Yes Lumens (theoretical): Powerboost: 15000 Lumens (actual): Powerboost: 11000 Manufacturer: Ledson Light color (secondary functions): Amber, White Size: 9 inch Connection (pins): 4 pins Color temperature: 5000K IP rating: IP69K Housing color: Black 1 lux at: 359 m (Powerboost: 677 m) Voltage: 9–36 V Connector type: DT Power use 12V: 2.2A (Powerboost: 12.6A) Power use 24V: 1.1A (Powerboost: 5.6A) Color: White Width (mm): 225 Depth (mm): 86 Beam pattern: Driving beam Function: Auxiliary light, Position light