Epix9+ Auxiliary Light

Swedish in-house developed design Epix9+ from Ledson is an innovative series of driving lights that elevates your vehicle to the next level. With a Swedish design language (developed in-house by Ledson) and outstanding performance, these driving lights give your vehicle a truly unique and exclusive appearance that is guaranteed to attract attention! Experience exceptional brightness and design in perfect balance. Dynamic position light Epix9+ activates the position light dynamically with an impressive sweeping motion that moves the light smoothly from one side of the lamp to the other before fully illuminating. This effect gives both you and your vehicle a distinct and unique character. Pulse-controlled Powerboost – It doesn’t get any easier Epix9 comes equipped with Ledson Powerboost – an extra power mode for those moments when you need (or simply want) maximum brightness. A simple movement with the high-beam stalk activates this impressive brightness, allowing you to easily adjust the amount of light according to your needs. With the new generation of Powerboost from Ledson, you switch mode very easily using the headlight flasher (tapping the high-beam stalk) by following a few simple steps shown here. NOTE: Your driving light is delivered in E-approved mode; follow the instructions to activate Powerboost mode. Features and technical data: Selectable position light with dynamic activation (amber or xenon-white, connect the colour you prefer) Range in E-approved mode: 359 m (1 lux) Range in Powerboost mode: 773 m (1 lux) Driving beam light pattern with 20° long-range spread E-approved ECE R112 (Ref. 30), R7 (white position light) EMC-secured ECE R10 (does not interfere with radio) E-approved mode: 2,640 lumens (theoretical), 2,112 lumens (actual) Powerboost mode: 15,000 lumens (theoretical), 11,000 lumens (actual) Neutral-white light (5000K) ETM (Electronic Thermal Management) – adjusts LED output depending on temperature for optimal lifespan Side-reflective optical system Pressure equalisation membrane Aluminium heat sink Adjustable stainless steel bracket Polycarbonate lens 36-month warranty Technical data: 180W (4 x 20W Cree LED + 4 x 10W Cree LED) Nominal output: 154W (Powerboost) IP69K (water/dustproof) Cable with 4-pin DT connector Voltage 9–36 V Power consumption in E-approved mode: 1.5A @ 12V and 0.7A @ 24V (high beam only, without position light) Power consumption high beam Powerboost mode: 12.6A @ 12V and 5.6A @ 24V (high beam only, without position light) Dimensions & weight: Width: 225 mm Height: 223 mm (incl. bracket) Depth: 86 mm Weight: 2.23 kg Included: One Ledson Epix9+ LED driving light 9" Bracket, bolts and screws for mounting the driving light with one or two mounting points DT connector (4-pin) – complement with Ledson Connect Installation manual Wiring instructions for cables (full installation manual included): Red: Driving light (+) Black: Driving light / Position light (– ground) White: Position light (+) white light Yellow: Position light (+) amber light NOTE: The DT connector must not be cut, as this increases the risk of moisture damage and voids the warranty. Technical information: E-marking ECE R10, ECE R112, R7 Height (mm) 223 (incl. bracket) Width (mm) 225.000000 Warranty 36 Months Synchronisable strobe light No Light source LED Powerboost Yes Mounting frame recessed No Lumen (theoretical) Powerboost: 15000 Lumen (actual) Powerboost: 11000 Manufacturer Ledson Light colour (secondary functions) Amber, White Size (inch) 9 inch Connector (number of pins) 4 pins Colour temperature 5000K IP rating IP69K Colour (housing) Black 1 lux at distance 359 (Powerboost: 773) Voltage 9–36 V Connector type DT Power consumption 12V 1.5A (Powerboost: 12.6A) Power consumption 24V 0.7A (Powerboost: 5.6A) Colour White Width (mm) 225 Depth 86 Beam pattern Driving beam Function (position) Driving light, Position light