Epix7+ Auxiliary Light

Self-developed Swedish design Epix7+ from Ledson is an innovative series of auxiliary lights that takes your vehicle to the next level. The 7" size of this light is especially suitable for passenger cars or smaller vehicles, as it is slightly smaller than its big brother, the Epix9, with its 9" size (approximately 45 mm narrower). With a Swedish design language (developed in-house by Ledson) and outstanding performance, these auxiliary lights give your vehicle a truly unique and exclusive appearance that is guaranteed to draw attention! Experience exceptional brightness and design in perfect balance. Dynamic position light Epix7+ activates the position light dynamically with an impressive sweeping motion that smoothly moves the light from one side of the auxiliary lamp to the other before fully illuminating. This effect gives both you and your vehicle a distinctive and unique character. Pulse-controlled Powerboost – It doesn’t get easier than this Epix7+ is equipped with Ledson Powerboost – an extra power mode for those moments when you need (or simply want) maximum brightness. A simple action using the high beam stalk activates this impressive power, allowing you to easily adjust the brightness according to your needs. With the new generation of Powerboost from Ledson, switching modes is extremely easy using the headlight flasher (tapping the high beam stalk) through a few simple steps shown here. NOTE: your auxiliary light is delivered in E-approved mode; follow the instructions to activate Powerboost mode. Mounting Epix7+ on your vehicle Connection: Ledson Connect 4-pin wiring kits – connect your auxiliary lights in just a few clicks! With Connect, installation becomes easy – the wiring kit with pre-assembled connectors fits all cars with halogen, xenon, or LED high beams. Plug & Play: Avoid complicated wiring – connect directly with the included fuse tap or adapter cable (accessory), with no modification to the car’s original wiring. Smart functionality: Control both the auxiliary light and the position light directly through the wiring. Flexible: Add a switch harness to turn off the auxiliary lights in fog or snow. Compatible with XBB: The perfect solution for vehicles with Xenon or LED – no impact on original wiring when using the XBB Dongle and Power Unit. Mounting: Can be mounted cleanly and easily using a license plate bracket or tube mount. See our various accessories for mounting options. Features and technical data: Selectable position light with dynamic activation (amber or xenon white, connect the color you prefer) Range in E-approved mode: 359 m (1 lux) Range in Powerboost mode: 533 m (1 lux) Driving beam light pattern E-marked ECE R112 (Ref. 30), R7 (white position light) – Read more about E-markings here EMC-secured ECE R10 (does not interfere with radio) E-approved mode: 3,840 lumens (theoretical), 3,072 lumens (actual) Powerboost mode: 11,500 lumens (theoretical), 8,200 lumens (actual) Neutral white light (5000K) ETM (Electronic Thermal Management) – adjusts diode strength depending on temperature for optimal lifespan Side-reflective optical system Pressure equalization membrane Aluminum heat sink Adjustable stainless-steel bracket Polycarbonate lens 36-month warranty Technical data: 120W (12 × 10W LED) IP69K (water/dustproof) – Read more about IP ratings here Cable with 4-pin DT connector Voltage 9–36 V Power consumption in E-approved mode: 3.2A @ 12V and 1.6A @ 24V (high beam only, without position light) Power consumption in Powerboost high-beam mode: 10.1A @ 12V and 4.6A @ 24V (high beam only, without position light) Dimensions & weight: Width: 180 mm Height: 177 mm (incl. bracket) Depth: 70 mm Weight: 1.36 kg Included: One Ledson Epix7+ LED auxiliary light 7" Bracket, bolts and screws for mounting the light with either one or two mounting points DT connector (4-pin), complete with Ledson Connect Installation instructions Wiring instructions (detailed installation instructions included): Red: Auxiliary light (+) Black: Auxiliary light / Position light (- ground) White: Position light (+) white light Yellow: Position light (+) amber light NOTE: The DT connector must not be cut as this increases the risk of moisture damage and voids the warranty.