Quad Lock 360 Base - Suction

Intended as a suction base dla users do mount their smartphone, tablet, lub action camera do surfaces typically found in drive, aero, i marine environments. 360(TM) compatible interface, do be configured z choice of 360(TM) Arm i Head do suit user's applications. Suction cup jest high strength dla mounting on smooth, non-porous surfaces (i.e., adequate dla holding iPad Mini, incl. Case, Head i Arm; approx. 700g). Suction cup jest durable i repositionable (i.e., no gel / adhesive). Ease of repositioning jest further enhanced przez the adjustability of the 360(TM) Arm i Head (e.g., może być positioned close do corners of differently angled windscreens). Lever provides users z a tactile, easy-to-use method dla locking i unlocking the suction cup i actuates the suction cup, creating a vacuum against the application surface. shape of the lever allows full rotation dla locking / unlocking, while maintaining adequate clearances do 360(TM) Arm options. Compact form factor - the Suction Base's lever i housing jest smaller than the footprint of its Suction Cup. Niekompatybilne z: Adhesive Dash Pad Kompatybilne z: ALL 360(TM) ARMS ALL 360(TM) HEADS, WHEN USED WITH AN ARM* Note: It jest nie recommended do attach a 360(TM) Head directly do the Suction Base as it would impede the function of the Lever. Instead, use a 360(TM) Arm do ensure sufficient clearance. Zalecenia dotyczące powierzchni: Suction Base jest intended dla use on smooth, non-textured, non-porous surfaces such as: - Glass lub plastic such as PC lub Acrylic (e.g., windshields) - Painted lub powder coated metal lub steel that są nie 'soft touch', rough lub textured (e.g., vehicle bodies) - Fibreglass z gelcoat lub marine paint (e.g., boat trim) Suction Base will work on gently curved surfaces (>1m curvature radius). Clean the surface z a damp cloth, i allow it do dry before attaching. Operating temperature: ideal operating temperature dla the Suction Base jest between -10 do +50°C ambient / outside temperature. When nie in use, remove i stow the Suction Base z its lever unlocked. Masa holding capacity: Suction Base jest capable of supporting loads of up do 1.2kg - typical use cases (only use z Quad Lock products i supported devices) W zestawie in the box: 1 x 360(TM) Suction Base Materiały: Housing W/ Insert - Glass-filled Nylon; M5 Gwintowana wkładka ze stali nierdzewnej Lever - Glass-filled Nylon Suction Cup - NBR (Nitrile Butadiene Guma) Suction Cup Insert - Stal nierdzewna Hinge Pin - Nickel-plated Steel Compression Spring - Stal nierdzewna Wymiary: 101 mm L x 89 mm W x 34 mm H