Nuovo
Descrizione
Cod. art.: 588508
OZZ WR2 è progettato per offrono good visibility e increased sicurezza. Esso offre un potenzaful e wide light con un actual luminous flux di 2200 lumens e un gamma di fino un 95 meters a 1 lux, making work safer even in tough conditions. red posteriore position light contributes a increased visibility e sicurezza.
lightbar ha un robust alluminio housing e un impact-resistant polycarbonate lens, making esso affidabile in tutti condizioni atmosferiche. With un IP68/69K rating, esso è protetto contro entrambi polvere e acqua. prodotto viene fornito con un three-year garanzia e è adatto un private usare come well come per professionale drivers e off-road enthusiasts.
Specification
Lamp type: LED
Diodes (pcs): 22
Lm theoretical (lumen): 3600
Lm measured (lumen): 2200
Volt (V): 10-32
Watt (W): 40
Potenza a 12V (Un): 3
Potenza a 24V (Un): 1.5
Potenza a 12V (W): 36
Potenza a 24V (W): 36
Color temp. (K): 5000
1 Lux a (m): 95
WxHxD (mm): 164x45x70
Connection: DT 3-Pin
Altri classifications: R10 - ECE R65 Class 2, ECE R23, ECE R148
IP: 68/69K
Lamp housing: Alluminio
Lens: PC
Temp.gamma: -40°C a +60°C
Beam pattern: Wide
Color: White/red
EMC: R10
Cavo (m): 1
Before installazione
1. Check local laws e regulations per auxiliary lights in areas dove veicolo will essere utilizzato before installazione. Ensure che installazione meets requisiti.
2. Read tutti installazione instructions.
3. Check che dimensioni e peso di lights e unità sono adatto un tuo veicolo, see figure 1.
4. Slight condensation inside può occur, questo will essere ventilated away after 2-4 hours di usare.
5. Funzionamento tensione: 10-32 V DC.
Installazione
1. Drill 1 o 3 holes con 11 mm drill, tighten lock nut.
2. Usare braces se needed per stabilization.
Connections e functions
1. Cavo connections
Nero: Earth, -
Red: Anteriore work light (E-marked), +
Blue: Red position light, +
2. Cavo set: 40A relay, 30A fuse.







